Maintenance And Cleaning - Westfalia 82 38 70 Original Instructions Manual

Maintenance and Cleaning

 Always first unplug the mini drill and milling machine before cleaning or
maintaining the machine.
 In case of excessive sparking, have the carbon brushes checked by a qualified
electrician. Important! The carbon brushes should not be replaced by anyone
but a qualified electrician.
 Use a brush or similar to clean the ventilation slots.
 Use a dry or slightly moist cloth to clean the housing. Do not use aggressive
chemicals such as bleach or solvents such as benzine to clean the machine.
 Never immerse the unit in water!
 Store the mini drill and milling machine in a dry location and protect it from
dust and dirt. Store the device out of reach of children.
Operation
14