Prestige 941 Rear Panel And Connections; Initializing The Cable Modem - ZyXEL Communications Prestige 941 User Manual

Prestige 941 Cable Modem
LAN 10M LAN10M
LAN 100M LAN100M
DATA DATA
CABLE CABLE
2.2

Prestige 941 Rear Panel and Connections

The figure below shows the rear panel of your Prestige 941 and the connection diagram.
2.3

Initializing the Cable Modem

This section outlines how to connect your Prestige 941 to the LAN and the cable network.
Preparing the CATV Coaxial Cable connection
Step 1.
2-2
Orange On: Ethernet link OK
Flashing: Sending and Receiving
Off: Ethernet not ready
Green On: Ethernet link OK
Flashing: Sending and Receiving
Off: Ethernet not ready
Green Flashing: Upstream or Downstream Channel is transmitting data.
Off: Connection is idle.
Green On: P941 is registered successfully with CMTS
Slow Flash (2 seconds interval) : P941 is scanning downstream
channel
Fast Flash (1 second interval) : P941 is locked on to downstream
channel and is ranging and registering with Cable Modem Terminal
System (CMTS).
Figure 2-2 Prestige 941 Rear Panel and Connections
Troubleshooting