HOLDEN JH CRUZE Owner's Handbook Manual page 324

2. Remove the bulb holder by
turning anti-clockwise. Replace
the bulb by pulling out of the
socket, and then pushing in the
replacement bulb.
Reverse light (1).
Tail light (2).
3. Insert bulb holder and turn
clockwise. Attach cover.
4. Switch on ignition, operate and
check the lights.
Side turn signal lights
Have bulbs replaced by your Holden
Dealer.
Number plate light
4 Door sedan
1. Unscrew both screws.
Vehicle care
2. Remove bulb housing downward,
taking care not to pull on the
cable.
Rotate bulb holder anti-clockwise
to disengage.
3. Remove bulb from holder and
renew bulb.
4. Insert bulb holder in bulb housing
and rotate clockwise.
5. Insert bulb housing and secure
using a screwdriver.
135