Overview; Setup; Installation; Sound-Control - EuroLite LCD-4 MP/S User Manual

Dimmer controller

Hide thumbs Also See for LCD-4 MP/S:

Table of Contents

Available languages

4.2 Overview

Overview on the control elements

1) POWER SWITCH

2) KANAL-LEDs

3) CHANNEL FADERS

4) FLASH-BUTTONS

5) MODE LEDs

6) MODE SELECT-BUTTON

7) PROG SELECT-BUTTON

8) DISPLAY

9) FADE TIME-FADER

10) DIMMER

11) AUDIO-FADER

12) SPEED-FADER

13) STANDBY-BUTTON

14) FULL ON-BUTTON

15) TAP SYNC-BUTTON

Install the device on a plane surface or install it in rack.

This device is built for 483 mm racks (19"). This rack should be a double-door rack where front panel and

rear panel can be opened. The rack should be provided with a cooling fan. When mounting the device into

the rack, please make sure that there is enough space around the device so that the heated air can be

passed on. Steady overheating will damage your device. You can fix the device with four screws M6 in the

rack. If several devices are to be installed, make sure that you leave 1 unit (1 u) space between the devices.

The sound-control works via the built-in microphone or via the sound input socket.

Connect the sound-signal from the mixer (e.g. Master 2) with the RCA-socket on the rear panel (input

sensitivity 0.1 V - 1 V).

16/36

00026201.DOC, Version 2.3

Table of Contents