Janome Quilt Maker Pro 20 User Manual page 53

User Manual
To update the machine software
 IMPORTANT: If you are running the QMP 20 from a Pro-Stitcher tablet computer, the Update screen
has only the machine icon because you update the machine software only. The QMP 20 display
software is part of the Pro-Stitcher software. Make sure you are also using the latest version
of Pro-Stitcher.
1. Insert the USB drive into the USB port on the bottom-
side of the front display. Then touch the machine icon to
update the machine's software.
2. You will be prompted to choose the file you want to use
to update the machine software. Touch the Select Version
box and then select the filename of the update file
you downloaded.
3. Be patient as this will take a few minutes.
4. When complete, the machine will beep. Remove the USB drive and restart the machine.
www.janome.com
QUILT MAKER PRO 20
Software Updates
Update Machine Soft ware
Update Display Soft ware
53