Janome Quilt Maker Pro 20 User Manual page 42

User Manual
This area of the main
screen controls the stitch-
ing modes. It is currently
set to manual mode.
It also shows the cur-
rent stitches per minute
setting and three stitch-
es-per-minute presets.
This area changes accord-
ing to the stitching mode
you've selected.
42
QUILT MAKER PRO 20
112
STITCH MODE
Regulated
Manual
Needle-stop button: Touch the arrow buttons to alternate between having the
needle stop in the up or down position when you press the stop/start button to
stop stitching. Your choice displays in blue.
This button does not move the needle, but rather indicates your preference for
the final needle position when quilting is stopped.
Tie-off button: Use this button to perform a tie-off at the start or finish of your
stitching. Touch the button and gently move the machine to perform the micro
stitches. The number below the image indicates how many micro stitches will
be performed.
For more information about how to configure the number of micro stitches in a
tie-off, see To configure tie-offs in the Toolbar Options section of this manual.
The Easy-Set Tension™ shows the top tension setting as a numeric value on the
display. The number on the button indicates the current tension, which is set by
manually turning the tension knob. After you establish the tension setting for a
particular thread (brand, weight, and color), record the value so you can easily
return to that tension setting when using that specific thread again.
25
30
20
35
5 0
The on-screen hand wheel
enables you to rotate the
machine's hand wheel
from the main screen
rather than reaching
around the machine to do
it manually.
www.janome.com