Steca Tarom 4545 Installation Manual

Steca Tarom 4545 Installation Manual

Charge controller with 3g streambbox

Advertisement

Quick Links

Steca Tarom Charge Controller – 3G STREAMBbox
Installation

Hardware summary

Manufacturer
Model
Size
Maximum number of this device connected to a
single SPLASH Monitoring 3GSbox
List of parts required for connection of inverter to SPLASH Monitoring 3G
STREAMBox
To enable you to connect the above hardware to SPLASH Monitoring you will need a SPLASH Monitoring 3G
STREAMBox and connection cables, these parts are listed below.
Part description
Device Make / Model
SPLASH Monitoring 3G STREAMBox
Connection cable 3G STREAMBox to device
Connection cable 3G STREAMBox to client's router
or LAN
Optional
External Antenna
High Gain External Antenna and mount
info@splashmonitoring.com
Steca
Tarom 4545
NA
1
Part number
As above
With Vodafone world-wide sim or local sim by
agreement
Part numbers Steca PA CAB2
None required
AGM024P
WMO
www.splashmonitoring.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tarom 4545 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Steca Tarom 4545

  • Page 1 Steca Tarom Charge Controller – 3G STREAMBbox Installation Hardware summary Manufacturer Steca Model Tarom 4545 Size Maximum number of this device connected to a single SPLASH Monitoring 3GSbox List of parts required for connection of inverter to SPLASH Monitoring 3G...
  • Page 2 Data Transmission The following diagram shows the hardware and how the data is transferred from the Tarom to the SPLASH Monitoring Servers. info@splashmonitoring.com www.splashmonitoring.com...
  • Page 3 Installation Guidelines To ensure long term reliable monitoring; 1. Install the Streambox and its power supply away from daily operational areas where the hardware could be accidently turned off such as someone’s desk or work bench. 2. Locate or secure the equipment to prevent it from falling, slipping and becoming disconnected 3.
  • Page 4 Basic Connectivity 3G STREAMBox USB Port: The 3G STREAMBox has only one mini USB port so a USB type A male to mini male converter is required to attach the Steca PA CAB2: Setting Up Your Tarom Set up the Tarom as directed in the Tarom User Manual, but in particular you must set the Open UART/RS232 to ‘On’: (Set ->...
  • Page 5 The hourly batch period, ten minute error reporting period and eight hour error reporting cycle are all factory configurable and can be updated remotely if required. If you believe you have a reasonable need to modify these values please contact Splash Monitoring at info@splashmonitoring.com Web Site Setup: The STREAMBox has already been preconfigured for monitoring the Tarom and the online setup takes only a...
  • Page 6 Trouble Shooting: • “No Stream Found” on the SM Web site: This is because the web site hasn’t received any data from the 3G STREAMBox. • The Tarom can only be interrogated for data if the batteries are connected and have sufficient charge, or the PV is generating sufficient power.

Table of Contents