Slingshot Rtk; Wi-Fi Field Hub Models; Operating Conditions - Raven Slingshot Field Hub 2.0 Installation Manual

Hide thumbs Also See for Slingshot Field Hub 2.0:
Table of Contents

Advertisement

Status Indicator
Network -
Displays the
status of the
cellular network.
Ethernet LED Status
The LED's next to the Ethernet plug on the back of the
Field Hub 2.0 will display as follows:
• Link - The Link LED is illuminated when a link is
established with an Ethernet device (i.e. Raven field
computer).
• Activity - The Activity LED flashes when data is being
transmitted/received by the Ethernet device.

Slingshot RTK

The Field Hub comes pre-configured to receive RTK corrections via a cellular
data connection. Contact your local Slingshot dealer for availability and
subscription information.
To begin utilizing RTK corrections from the Field Hub:
1. Connect your GPS receiver to the serial port on the Field Hub using the
appropriate Raven serial cable.
Warning:
Use only Raven approved serial cables designed specifically
for your GPS receiver or data overages may result. Contact
your local Slingshot dealer for appropriate cable part number
and ordering information.
2. Set the receiver baud rate to 115200.
3. Set the receiver to accept corrections.
Note: Depending on your receiver, this may require an unlock code. Contact
your receiver dealer or manufacturer for more information.

Wi-Fi Field Hub Models

Personal mobile devices may be used to connect to the Internet via the Wi-Fi
Field Hub. Search for the Field Hub's SSID# (printed on the Field Hub
information sticker) on the mobile device being connected. The Wi-Fi
password is also located on the Field Hub information sticker.

Operating Conditions

Store and operate the Field Hub according to the following conditions:
6
State
Solid green
Flashing green
Flashing yellow/
green
Flashing yellow/
green/off
Solid yellow
Flashing yellow
Solid red
Flashing red
The network is ready and LTE service is available.
The network is ready and LTE service is roaming.
The network is ready, 2G or 3G service is
available.
The network is ready, LTE service is not on, and
roaming 2G or 3G.
Connecting to the network.
No service is available.
The link to the network is down, no cellular network
is present.
Authentication/negotiation has failed (EV-DO only)
Status
Link
Activity

Advertisement

Table of Contents
loading

Table of Contents