Maintenance And Storage; Battery Maintenance; Warranty - Jet JDTW Series Owner's Manual

MAINTENANCE AND STORAGE

ATTENTION:
One-year periodic recalibration is necessary
to maintain accuracy.
Please contact your local dealer for
calibrations.
CAUTION:
4. Do not leave this wrench in any place exposed
to excessive heat, humidity, or direct sunlight.
5. Do not use this wrench in water.
6. If the wrench gets wet, wipe it with a dry towel
as soon as possible. The salt in seawater can
be especially damaging.
7. Do not use organic solvents, such as alcohol or
paint thinner when cleaning the wrench.
8. Keep this wrench away from magnets.
9. Do not expose this wrench to dust or sand as
this could cause serious damage.
10. Do not apply excessive force to the LCD panel.

BATTERY MAINTENANCE

1. When the wrench is not used for an extended
period of time, remove the battery.
2. Keep a spare battery on hand when going on a
long trip or to cold areas.
3. Do not mix battery types or combine used
batteries with new ones.
4. Sweat, oil and water can prevent a battery's
terminal from making electrical contact. To
avoid this, wipe both terminals before loading
a battery.
5. Dispose of batteries in a designated disposal
area. Do not throw batteries into a fire.

WARRANTY

JET Digital torque wrenches are warranteed to be
free of factory defects. Calibration is the
responsibility of the user and is not covered. For
warranty details, consult the JET hand tools
catalogue or your local distributor.
1. Over-torque (105% of
Max. torque range)
could cause breakage
or loss of accuracy.
2. Do not shake violently
or drop wrench.
3. Do not use this wrench
as a hammer.
13
14