Display Description; Initial Use; Insert The Batteries - Beurer BM 93 Instructions For Use Manual

5.2 Display description

13
12
11
10 9 8 7

6. Initial use

6.1 Insert the batteries

1. Open the battery compartment lid.
2. Insert four 1.5V AAA type (LR03) batteries. Make
sure that the batteries are inserted the correct way
round. Do not use rechargeable batteries.
3. Close the battery compartment lid again carefully.
4. The device will emit an acoustic signal and the year
will flash on the display.
The batteries must be replaced when
1
2
3
6 5 4
appears on the display.
42
1. Systolic blood pressure display
2. Classification of measured values
3. Diastolic blood pressure display
4. Measurement mode
(blood pressure = "BP", ECG = "ECG"
5. Current user memory
6. Bluetooth ® connection symbol
7. Atrial fibrillation indicator (only for blood
pressure measurement)
8. Low battery status symbol
9. Alarm symbol
10. Standby mode = time,
ECG measurement = 30 sec. countdown;
memory mode = shows the number of
measurements/measurement time
11. ECG result display
12. Heart rate display: flashes in sync with
your heartbeat during the measurement.
13. Heart rate: shows the average heart rate
during the recording process.