ZyXEL Communications 1 Support Notes page 20

NetAtlas Support Notes
VLAN Configuration via EMS
In this section, we will give an example to illustrate how to use EMS to create a VLAN2
in GS-4024. Here are the procedures.
Step 1: In the device panel list shown in Figure 12, right-click Configuration, Switch
Configuration and then Switch Setup tab as shown in Figure 12 and Figure 13.
Step 2: Define the VLAN type, there are two types of VLAN, one is 802.1Q and the
other is Port-based VLAN. Select 802.1Q as the VLAN type and click Apply in the
Figure 14.
Figure 12 Device panel list
Figure 13 Switch Configuration
20
All contents copyright (c) 2006 ZyXEL Communications Corporation.