Advertisement
Quick Links
Supported Products
ET-7200 Series
ET-7200-UT Series
Technical Support
PET-7200 / ET-7200 User Manual
http://ftp.icpdas.com/pub/cd/6000cd/napdos/et7000_et7200/document/
What's in the Box?
PET-7200/ET-7200 Module
1
Factory Default Settings
Network
Connection
IP Address:
Subnet Mask:
Gateway:
Technical Support: service@icpdas.com
Default
192.168.255.1
255.255.0.0
192.168.0.1
PET-7200/ET-7200
PET-7200 Series
Quick Start
Authentication
User name:
Password:
Quick Start
V1.2, March 2018
Default
Admin
Admin
P1
Advertisement
Related Manuals for ICP DAS USA ET-7200 Series
Summary of Contents for ICP DAS USA ET-7200 Series
- Page 1 PET-7200/ET-7200 Quick Start V1.2, March 2018 Supported Products ET-7200 Series PET-7200 Series ET-7200-UT Series Technical Support PET-7200 / ET-7200 User Manual http://ftp.icpdas.com/pub/cd/6000cd/napdos/et7000_et7200/document/ What’s in the Box? PET-7200/ET-7200 Module Quick Start Factory Default Settings Network Default Authentication Default...
- Page 2 Connecting to Network, Computer and Power Non-PoE Switch +12 ~ 48 V Power Supply PoE Switch +12 ~ 48 V Power Supply Assigning a Valid IP Address - Method 1 1) Install eSearch from http://ftp.icpdas.com/pub/cd/6000cd/napdos/software/esearch/ 2) Launch eSearch and click “Search Server” ...
- Page 3 3) Double-click the name for your module on the list 4) Enter the network configuration and click “OK” 5) Repeat Step 2. to search the module again To make sure your modifications take effect. Assigning a Valid IP Address - Method 2 1) Set the IP configuration on your computer The ET-7200 module comes with the default IP address of 192.168.255.1, you must chose an IP address for the computer in...
- Page 4 3) Fill out the User name and Password Fill out the factory default user name and password “Admin” and then click “OK”. 4) Assign a valid IP address for your ET-7200 module 1. Click “Configuration” 2. Click “Network Settings” in the sub-menu 3.