4.
Connect cable to OUT jack of PD-01
5.
Connect output cable to amplifier
Connect another cable to the
OUT jack of the PD-01. Make
sure that the plug is inserted
firmly.
Plug the cable from the OUT jack of the PD-
01 to the IN jack of the amplifier.
6.
Raise volume
Turn power to the amplifier on,
and raise the LEVEL control on
the guitar and PD-01.
Always follow the
above sequence.
If steps are performed in
reverse order, there is a
danger of damage to the
amplifier or speakers.
ZOOM Power Drive PD-01
7
Need help?
Do you have a question about the Power Drive PD-01 and is the answer not in the manual?