Front Glass Installation - Empire Comfort Systems EBL50 Owner's Manual

Fireplace Installation

Front Glass Installation

1. Evenly distribute supplied glass
rock on the front tray of the
fireplace (Figure 14).
2. Carefully mount front glass
assembly so that the front glass
hooks (4) hang on the front glass
mounts on the fireplace (4) (Figure
15).
3. Use the supplied two Phillips
sheet metal screws to fasten
the glass assembly tabs to the
fireplace (Figure 16).
4. If unit is not hardwired, plug
fireplace into a 15 Amp, 120 Volt
outlet (refer to NOTE 1).
Figure 14
Front glass
assembly
16
Figure 15
Figure 16
Front tray
Mounts (4)
Hooks (4)
Tab
www.empirecomfort.com