Residual Voltage Measurements At The Ae Port - Ametek CDN 117A Series Operating Manual

AMETEK CTS
8.3.4.

Residual voltage measurements at the AE port

The diagrams shown are typical for the standard coupling/decoupling network CDN 117A model. The diagram shows volt-
age impulses with different couplings and 4000V impulse open circuit waveshape at the AE Port
Residual voltage with capacitive coupling, Pulse 1,2/50 s
Residual voltage with capacitive coupling, Ringwave 12 Ω
Spec devices: The residual voltage is according the ordered specification in the technical data.
Operation Manual
Residual voltage with GDT (gas arrestor) coupling , Pulse 1,2/50 s
Residual voltage with capacitive coupling, Ringwave 30 Ω
V 1.00
CDN 117A series
29 / 30