Table of Contents
Advertisement
3.2
Basic Setup
Setting up Storm3 consists of three parts; System Configuration items, Sensor Setup, and Data Retrieval.
System Configuration
All of the system configuration options are found within the 'System Overview' sub menu of the 'Home'
navigation tab. Here the Site Id is set along with the system date and time. Scanning can also enabled or
disabled here. The Site ID is important because it uniquely identifies a specific site location and is also used
as the filename for the logged data.
Figure 6: Storm3 Graphical User Interface context help
As you enter the Site ID, notice the color of each character. A red colored character is not accepted, a blue
character is acceptable. Space is limited to sixteen (16) characters, no spaces, periods, or any non-text
characters.
The 'System Overview' page also allows the user to inspect status parameters like battery levels, number of
reboots, the current firmware version and serial number. The last four lines of the current log file are also
12
Advertisement
Table of Contents
