Fujitsu N7100 Consumable Replacement And Cleaning Instructions page 8

N7100 C R
ONSUMABLE EPLACEMENT AND
8
C I
LEANING NSTRUCTIONS
R R
EPLACING THE OLLER
3. Remove the pick roller.
Slightly lift the Lock release tab of the shaft (by approximately 5 mm),
slide the shaft to the direction of the arrow below, and lift it up all the
way.
ATTENTION
Be careful not to touch the gear near the lock release tab on the shaft as
it contains grease.
S ( .)
ET CONT
Lock Release Tab