ProMix Web Interface
ProMix Web Interface
There are two possible ways to connect a PC to the Pro-
Mix Auto or ProControl.
•
Local Network Connection (most common). Patch
cable from the local network plugs into the ProMix
Web Interface connection. See F
Network Connection, below.
Non-hazardous Area Only
Patch Cable
Laptop PC
F
. 1 Network Selection
IG
Local Network Connection
Hardware and Software Configuration
Hardware
Patch cables are used to connect each ProMix unit to
the local network and to the ProMix Web connection (A)
on the EasyKey panel. See F
4
. 1 and Local
IG
Local
Network
Local Network Connection
Direct Connection
Crossover Cable
. 2.
IG
•
Direct Connection to the ProMix Auto or ProCon-
trol. Crossover cable from the PC plugs into the Pro-
Mix Web Interface connection. (A crossover cable is
provided with all systems.) See F
Patch Cable
or
A
Modbus2
F
. 2 EasyKey Web Connection
IG
. 1 and page 10.
IG
TI7232A
EasyKey Display
311191C