Promix Network Interfaces - Graco ProMix Auto Software Instructions

This manual (311191) is available in the following languages:
Manual Language
311191 English
311273 French
311274 Spanish
311318 German
311276 Japanese

ProMix Network Interfaces

Web and Modbus Interface
Web Interface - allows users to connect, view, and
change the ProMix setup, log, and error files. It does not
display run data.
Modbus/TCP - enables process equipment to read vari-
ables while operating, as well as control the machine
and change setup. It does not provide access to job and
error logs.
Use the ProMix Software to:
• Update software
• View
➜ software versions
➜ material usage report
• Upload
➜ setup values
➜ a custom language to view on screen
• Download
➜ setup values
➜ job and alarm logs
• Clear
➜ job and alarm logs
➜ material usage report
• Reset
➜ factory defaults
➜ password
311191C
Manual Language
311277 Chinese
311278 Korean
311297 Italian
311298 Dutch
If Java Error appears when running the program
for the first time, you must download Java RTE (Run
Time Environment) for the program to operate correctly.
Follow the screen link to Java version 1.4.2.09 or newer.
Or enter http://java.sun.com/j2se/1.4.2/download.html
and select Download J2SE JRE. The file is approxi-
mately 15 MB.
✓
If the Graco program will not start, check the
following.
Is the ProMix power on?
Are the cables fully seated in both the PC and
ProMix ports?
• Is the LED on the EasyKey
• Is the LED on the ethernet jack illuminated?
Are the LEDs on the back of the EasyKey
illuminated? The bottom left LED should be
constantly illuminated showing a network
connection. The bottom right LED should
illuminate when network traffic is occurring.
If there are no LEDs illuminated check for
loose connections or a loose board.
To isolate the problem, try communicating with a
different:
• PC
• ProMix system if available
Check Local Network Connection. See page 4.
Warnings
™
illuminated?
3