Re Cr - KERN 440 Series Operating Manual

10.3.4

rE Cr

The remote control commands s/w/t are sent from the remote control unit to the
balance as ASCII code. After the balance having received the s/w/t commands, it will
send the following data.
Take into account that the following remote control commands must be sent
without a subsequent CR LF.
s Function: Stable weighing value for the weight is sent via the RS232
w Function: Weighing value for the weight (stable or unstable) is sent via
t Function: No data are sent, the balance carries out the tare function.
h. Format for stable values for weight/quantity/percentage
1 2 3 4
*
B B B B
i. Format in case of fault
1 2 3 4
B B B B
j. Format for unstable values for weight/quantity/percentage
1 2 3 4
*
B B B B
SYMBOLS:
*
B = blank or M
B / 0 /. = blank / weight values / decimal dot, depending on the
measuring Value
g = weight unit / unit / %
E, o, r = ASCII code or "E, o, r"
CR = carriage return symbol
LF = line feed symbol
34
interface
the RS232 interface
5 6 7 8
B B B B
5 6 7
B B B
5 6 7 8
B B B B
9 10 11 12 13 14 15 16 17 18
B 0 . 0 B
8 9 10 11
E r r o
9 10 11 12
B 0 . 0
g B B C LF
R
12 13 14
r CR LF
13 14 15
B CR LF
440-BA-e-1744