Animal Weighing Function; Reset To Factory Setting - KERN 440 Series Operating Manual

Animal The animal weighing function can be applied for busy weighing.
weighing During a defined period the average value of the weighing results is
function formed.
The more unquiet the weighed item, the longer the period should
be selected.
 In weighing mode keep the PRINT key pressed until [Unit]
 Press the MODE button several times until „ANL" is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired settings by pressing the MODE key
 Use the SET key to confirm selection.
 Put the weighing good (animal) on the weighing plate and press
 Use the SET key to change between animal weighing and
 Press the SET key to restart the weighing cycle for animal
Reset to
factory setting This function resets all balance settings to factory setting.
 In weighing mode keep the PRINT key pressed until [Unit]
 Press the MODE button several times until „rSt" is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired settings by pressing the MODE key
rSt
rSt
 Use the SET key to confirm selection. The balance returns to
440-BA-e-1744
appears.
ANL 3 Period 3 seconds
ANL 5 Period 5 seconds
ANL 10 Period 10 seconds
ANL 15 Period 15 seconds
ANL off Animal weighing not active
the SET button. In the display runs a „Countdown".
The average value of the weighing results is displayed and
remains displayed on the screen.
normal weighing.
weighing.
appears.
yes Balance will be reset to factory setting.
no The balance keeps its individual setting
weighing mode.
29