Table of Contents
Advertisement
Pressurized Equipment Hazard
Fluid from gun, leaks or ruptured components can splash in the eyes or on skin and cause serious
injury.
•
Follow Pressure Relief Procedure, page 3 when you stop spraying and before cleaning, checking
or servicing.
•
Do not point spray gun at anyone; put hand, fingers or rag over nozzle, or stop or deflect leaks with
your hand, body, glove, or rag.
•
Wear protective clothing, gloves, and eyewear.
Cleaning Solvent Hazard with Plastic Parts
Use only compatible water-based solvents to clean plastic structural or pressure-containing parts. Many
solvents can degrade plastic parts to the point where they could fail. Such failure could cause serious
injury or property damage. See Technical Data on page of this instruction manual and in all other
equipment manuals. Read fluid and solvent manufacturer's warnings.
Sprayer Warnings
For sprayer operation and warning information refer to your sprayer or compressor operation manual.
Pressure Relief Procedure
o reduce the risk of serious bodily injury, includ-
T
ing electric shock and splashing fluid in eyes, fol-
low this procedure whenever you stop spraying:
1. Shut OFF air source.
2. Disconnect power source.
3. Turn gun air valve ON.
309584H
WARNINGS
Grounding
o reduce risk of electrical shock, proper
T
electrical grounding is essential. See your
sprayer or compressor instruction manual and
consult your local electrical codes for detailed
grounding instructions.
3
Advertisement
Table of Contents
