Receiving Voice Calls; Distinctive Ringing; Disconnecting Data Calls; Disconnecting Data Calls Manually - 3Com OfficeConnect 3C892 User Manual

88 C 8: P
HAPTER LACING

Receiving Voice Calls

Distinctive Ringing

Disconnecting Data
Calls

Disconnecting Data Calls

Manually
, R D
ECEIVING AND ISCONNECTING
Reviewing ISDN LAN Modem statistics
Refer to Chapter 9, "Reviewing Statistics,"
Incoming calls for data transfer are not supported. For example, you cannot call
into the ISDN LAN Modem to use a computer as a server that others would dial
into and use for downloading information.
Voice calls received by the ISDN LAN Modem will be routed to the analog
equipment connected to the voice ports. By default, incoming voice calls to
telephone number one are routed to Phone port one, and incoming voice calls to
telephone number two are routed to Phone port two.
To change the default routing, refer to "Changing Voice Call Routing" in Chapter
6.
Specialized telephone equipment such as some speakerphones, answering
machines, and fax machines that require more than 42 VAC ringing voltage may
not detect incoming calls.
You can configure the ISDN LAN Modem to distinguish between telephone rings
for calls to telephones connected to the ISDN LAN Modem's phone ports. When
this feature is enabled, the ringing pattern for calls to telephone number one
changes to distinguish between calls to telephone number one and calls to
telephone number two.
By default this feature is disabled. To enable, do the following.
1 Go to the ISDN LAN Modem's main configuration page:
http://3com.oc.lanmodem/
2 Click ISDN Parameters.
3 Locate Distinctive Ringing and then click the box labeled Enable.
4 Click Submit.
You can disconnect data calls manually or use timers to disconnect calls
automatically.
To disconnect calls manually, do the following:
1 From the ISDN LAN Modem home page, click Manual Calling. Alternatively, if you
are using the custom browser, click Dial/Hang Up from the Links menu bar.
The Manual Call Control window appears.
2 In the table, locate the name of the service provider from which you wish to
disconnect and then verify that the call is up under the Status of Call column.
3 Click Hangup Call.
A message indicates that the call is being disconnected.
C
ALLS
for instructions.