SI NANO DUO Installation Instructions Manual
Wirefree zigbee
Hide thumbs
Also See for NANO DUO:
- Installation instructions manual (16 pages) ,
- Installation instructions (4 pages) ,
- Installation instructions manual (12 pages)
Subscribe to Our Youtube Channel
Related Manuals for SI NANO DUO
Summary of Contents for SI NANO DUO
- Page 1 Nano Duo Installation Instructions Wirefree Zigbee INSTALLERS: Please leave this manual with the owner. Doc. # 400108...
- Page 3 PARTS LIST - NANO DUO - WIREFREE - ZIGBEE Wall Brackets (2) Shades Please note all the QR Codes on your Shade motors. See the last page on these instructions. Screws Included (3 per Bracket) Spacer Blocks (optional - 4 per shade)
- Page 4 SPACER BLOCKS AND LEVELING SHIMS (OPTIONAL) Spacer Blocks - used to clear an obstruction in the fabric path. Connect spacer blocks to shade brackets before installation. Note: Do not use more than 4 spacer blocks per bracket. Leveling Shims - used if the window frame is out of level. Connect to shade brackets before installation Note: do not use more than 2 leveling...
- Page 5 INSTALLATION - NANO DUO - WIREFREE - ZIGBEE 1. Install the wall brackets 1/2” - 9/16” from the end of the shade with the supplied screws. (The closer to the end of the cassette, the better.) 1 ” 9 ”...
- Page 6 INSTALLATION - NANO DUO - WIREFREE - ZIGBEE 3. Hang shade onto wall brackets and center in opening. 4. Use thumb to lock shade in place Installation - Nano Duo - Wirefree - Zigbee...
- Page 7 PROGRAMMING - ZIGBEE PROGRAMMING STEPS (TaHoma/LinkPro Z must be plugged in and on the network) Step 1: Fine tune lower limit. Step 2: Assign shades to groups and remotes. Step 3: Pair devices and groups with remotes. The lower limit of every shade is preprogrammed to 1/2” from the bottom of the window. After installing each shade, follow these steps to adjust the lower limit: STEP 1 - Fine tuning lower limit : 1.
- Page 8 TROUBLESHOOTING - ZIGBEE Tech Support: 512.832.6939 Problem Possible Cause Action to Take For Zigbee Check network connection to the internet, and ensure the TaHoma LED is Red. No internet TaHoma is properly connected via ethernet or Wifi. connectivity. Check the battery level of a motor via the TaHoma Shade won’t operate.
- Page 9 QR CODES Please keep a note of all the Serial No.s on your shade motors. OR for larger shade orders, refer to your Sales Order document for the list. Room Shade 1 (QR Code1) Shade 1 (QR Code 2) Shade 2 (QR Code1) Shade 2 (QR Code 2) Shade 3 (QR Code1) Shade 3 (QR Code 2)
- Page 10 Screen Innovations 9715-B Burnet Rd, Suite 400 Austin, TX 78758 512.832.6939 www.screeninnovations.com v. 1.0 4 March 2020...
Need help?
Do you have a question about the NANO DUO and is the answer not in the manual?
Questions and answers