Advertisement
Disassembly and adjustments:
If you plan only to perform a periodical maintenance of the module, you should open the
LCF's door while the tray is in the upper position and clean the bottom of the module with vacuum
cleaner. Then close the door and press the tray-down button. When the tray is down open the front
door and clean with rubber restoring fluid the pick-up, feed and separation rollers. Note: some times
operators complain about frequent paper jams in the module, but the pick up and separation rollers
are ok. You should look at the separation roller – often it wears unevenly. If the roller has a worn
strip along its length, you should replace it. To replace the three feed rollers follow the instructions
bellow.
Advertisement
