Advertisement
4. To remove the pick up and feed tires, remove one screw A, a plastic clip B, the bronze bushing
C and the support plate D. Remove the cylindrical weight E from the pick up roller and pop out
the shaft from the white lever F. You should be able now to pull out the pick up roller. Remove
the white lever from the feed roller shaft. Pull out the feed roller. Note: pay attention to the
orientation of the rollers. They have built in one-way clutches and if you change their
orientation during assembly the feed mechanism won't operate at all. See figure 15.
15
D
A
C
B
E
F
Advertisement
