Trouble Shooting - Grizzly AHS 4055 Lion Set Translation Of The Original Instructions For Use

GB

Trouble Shooting

Problem
Appliance won't
start
Intermittent
operation
Blades become
hot
Bad trim
Display on the
device flashes -
alarm sounds
70
Possible cause
Battery ( 10) discharged
10) not inserted Insert battery (see „Operation")
Battery (
Safety switch ( 4) not
pressed properly
On/Off switch ( 7)
defective
Internal loose contact
On/Off switch ( 7) defec-
tive
Blades ( 2) are blunt
Blades ( 2) are notched
Too much friction due to
lack of lubrication
Too much friction due to
missing lubrication
Knife bar ( 2) dirty
Knife bar ( 2) blunt
Bad cutting technique
Bars blocked by objects
Corrective action
Recharge battery (see „Charging")
Turn on (see "Operation")
Send in to Service Centre for repair
Send in to Service Centre for repair
Have the blades sharpened or re-
placed (Service Centre)
Have the blades checked or replaced
(Service Centre)
Oil the blades (
Lubricate knife bar (
Clean knife bar
Grind or have knife bar replaced
(Service Centre)
See ("Working with the hedge trimmer")
Switch off und remove the
battery. Remove objects
2)
2)