Removing / Inserting The Battery; Recharging The Battery; Used Batteries; Operating - Grizzly AHS 4055 Lion Set Translation Of The Original Instructions For Use

GB
Removing / inserting the
battery
1. To insert the battery (10), place
it on the guide track (13) and
push it back into the appliance.
It will audibly snap in.
Do not insert the battery until
the appliance is fully assembled.
Risk of injury!
2. To remove the battery (10) from
the appliance, press the release
button (15) on the battery and
pull out the battery.

Recharging the battery

Allow a freshly charged battery to
cool down for approx. 15 minutes
before inserting it into the battery
charger).
1. Remove the battery (10) from
the appliance, as necessary.
2. Inser the battery (10) in the
charging compartment of the
battery charger (9). It will audib-
ly snap in.
3. Plug the battery charger (9) into
a mains outlet.
The charging indicator lights up:
green LED flashes, red LED
lights up: Battery charging
green LED lights up:
Battery is charged
4. When the battery is fully rechar-
ged unplug the battery charger
(9) from the mains.
5. Press the release button (
on the battery (10) and pull the
battery out of the battery char-
ger (9).
66

Used batteries

• If a fully recharged battery lasts for
considerably shorter operating times,
the battery is used up and needs to
be replaced. Only use an OEM battery
pack replacement available from our
Customer Service.
• Always take heed of the applicable
safety instructions as well as the envi-
ronmental protection regulations and
information (see "Waste Disposal and
Environmental Protection").

Operating

Wear suitable clothing and work
gloves when working with the
equipment.
Ensure that the equipment is
functional before each use. The
On/Off switch and the safety
switch must not be held closed.
They must switch off the motor
when on is released. Should a
switch be damaged, stop working
with the equipment. Ensure that
the mains voltage value matches
the label on the equipment.
Reduce the risk of injuries and
accidents by wearing personal
protection equipment and ensur-
ing that the unit is fully func-
tional.
After turning off the appliance,
the blades will keep moving for
some time. Allow the blades
to come to a standstill. Neither
touch nor slow down the moving
blades. Risk of injury!
15)
Note noise protection and local
specifications.