Folding, Transporting & Unfolding Your Treadmill; To Fold The Treadmill; To Transport The Treadmill; To Unfold The Treadmill - Bowflex 3 Series Owner's Manual

Folding, Transporting & Unfolding your Treadmill
This treadmill has a folding mechanism; you must stop operation while folding and transporting. Make sure the power is
off and the power cord is removed and unpluged before folding and transporting the treadmill.

To fold the treadmill:

1. Stop the Treadmill belt.
2. Bring Elevation to zero.
3. Turn off power.
4. Squeeze the release mechanism then lift the deck to fold
up the treadmill. Make sure the pin clicks into position
and the deck is secure before moving the treadmill.

To transport the treadmill:

1. After folding, as mentioned in step 4 of folding section,
please be sure deck is locked/engaged in up position.
2. Remove Power cord.
3. Pull backwards, holding the top of the deck, until the
wheels can move smoothly.

To unfold the treadmill:

Squeeze the release mechanism down and gently lower the deck until it sits on level ground.
Fan (Bowfl ex 5 and 7 Series Only)
®
1. Turn on by pressing the LOW/POWER fan button.
2. To adjust the speed of the fan press the LOW/POWER, MEDIUM, or HIGH fan buttons.
3. If the fan is on the high or medium settings, press LOW/POWER twice to turn off.
Taking Care of Your Treadmill
27