Specifications; Warning Labels On The Machine; Symbols On The Machine - Zenoah BC251 Owner's Manual

BC251
2. Specification
Model
Overall size (LxWxH)
Dry weight
Engine Model
Displacement
Fuel
Carburetor
Ignition system
Spark plug
Fuel tank capacity
Starter
Clutch
Reduction ratio
Cutting head rotating direction
Specifications are subject to change without notice.

3. Warning labels on the machine

(1) (2)
(1) Read owner's manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Wear foot protection.
(4) Wear gloves.
(5) Beware of thrown objects.
(6) Warning / Attention
(7) Keep all children, bystanders and helpers 15 meters away from the machine.
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
4. Symbols on
the machine
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
The port to refuel the "MIX GASOLINE"
GB-4
mm
kg
3
cm
Mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil)
L
(3) (4) (5)
BC251
1810 x 330 x 390
5.4
Zenoah GT25N4
25.4
Diaphragm type
Flywheel magneto (C.D.I.)
NGK BPMR7A
0.62
Recoil starter
Centrifugal type
1.462
Counter-clockwise (Operator view)
(6)
Never modify your machine.
We won't warrant the machine, if you use the
remodeled brushcutter or if you don't observe
the proper usage written in the manual.
Position: FUEL TANK CAP
The direction to close the choke
Position: ENGINE COVER
The direction to open the choke
Position: ENGINE COVER
(7)