VIAcast Quick Start Guide
For Installer/Administrator
Scan for full
This guide helps you install and configure your VIAcast for the first time.
manual
Go to
check if firmware upgrades are available.
Step 1: Check what's in the box
VIAcast dongle
Step 2: Get to know your VIAcast
#
Feature
1
Communication LED
2
USB Connector
This product complies with FCC Rule Part 47 CFR FCC Part 15 Subpart E § 15.407, FCC ID: Q87-WUSB6300.
Operating Frequency Range (Mhz)
Low Frequency (MHz)
High Frequency (MHz)
2400
2483.5
5150
5350
Step 3: Install VIAcast
•
Plug the
VIAcast
dongle into any of the USB ports on your VIA collaboration device.
VIAcast is compatible with the following devices: VIA GO, VIA Connect PRO and VIA Connect PLUS.
Caution:
There are no operator serviceable parts inside the unit.
See
www.KramerAV.com
Step 4: Enable VIAcast
1.
With the
VIAcast
dongle plugged into your VIA collaboration device, turn on or reboot your VIA collaboration device.
2.
Log in to your VIA device embedded web pages with a Web Administrator username (default = su) and password
(default = supass).
The embedded web pages appear.
3.
Click VIA Management > VIA Settings on the navigation pane.
The VIA Settings page appears with the System & IOS tab open.
®
4.
In the Miracast
Settings section, click ON.
5.
Click Reset VIA Session
VIAcast
is enabled and the
VIAcast Quick Start
www.kramerav.com/downloads/VIAcast
1 Quick start guide
Function
Flashes slowly when enabled. Flashes quickly when a device is mirroring.
Connect to your VIA collaboration device.
Power (Watt)
Bandwidth (Khz)
0.1
40,000.00
0.1
40,000.00
for updated safety information.
VIAcast
communication LED flashes slowly.
to download the latest user manual and
Type of Modulation
OFDM
OFDM, DSSS
P/N: 2 9 0 0 - 3 0 1 0 6 2 QS
Rev: 4
Need help?
Do you have a question about the VIAcast and is the answer not in the manual?
Questions and answers