Makita Dolmar DCS460 Repair Manual page 11

03 CHAIN BRAKE / GUIDE BAR BOLT
Remove the circlip 7.
Pull the handguard and disengagement
mechanism up and out parallel to their axes.
When reassembling always use a new
circlip 7 (927.304.000)!
Assemble the handguard and disengagement
mechanism, brake band and brake band
spring in reverse order.
7
Replacing the guide bar bolt
Screw two nuts onto the bar bolt and
counterlock them.
Unscrew the bar bolt.
Assembly: Screw in bar bolt to 20.5
and secure with Loctite 243 (980.009.000).
0.5 mm
11