Technical Specifications - Graco E-Flo SP Installation And Parts Manual

Technical Specifications

E-Flo SP Electric Pumps
Driver Thrust
Stroke length
Maximum fluid operating temperature
Maximum driver cycle rate
Driver line voltage rating
Driver peak input amerpage
Input current
Sound pressure
Fluid Outlet Size - all pump materials
Check-Mate 100, 200, 250
Check-Mate 500
Dura-Flow 115, 145, 180, 220, 290
Dura-Flow 430
Maximum Fluid Working Pressure
100cc Check-Mate - All
200cc Check-Mate - All
250cc Check-Mate - All
500cc Check-Mate - All
145cc Dura-Flo - SS
180cc Dura-Flo - SS
220cc Dura-Flo - SS
290cc Dura-Flo - SS
430cc Dura-Flo - SS
115cc Dura-Flo - CS
145cc Dura-Flo - CS
180cc Dura-Flo - CS
220cc Dura-Flo - CS
290cc Dura-Flo - CS
Motor Oil
Specification
Capacity
Notes
* Full load amps with all devices operating at maximum capabilities.
** Measured per EN ISO 11202:2010.
*** The driver gearbox is shipped from the factory pre-filled with oil. Additional oil must be purchased sepa-
rately.
3A6586D
US
4,840 lbs
4.75 in.
180° F
25 cycles per minute
200-240 VAC, single phase, 50/60 Hz
20 A per phase @ full load*
20 A maximum
<77 dBa**
1 in. NPT, female
1-1/2 in. NPT, female
1 in. NPT, female
1-1/2 in. NPT, female
6000 psi
4200 psi
3400 psi
1600 psi
5600 psi
4500 psi
3700 psi
2800 psi
1900 psi
6000 psi
5600 psi
4500 psi
3700 psi
2800 psi
Graco part no. 16W645, ISO220 silicone-free synthetic EP
gear oil***
1.5 quarts
Technical Specifications
Metric
21.5 kN, 2.2 kg
120.7 mm
82.3° C
414 bar, 41.4 MPa
290 bar, 29.0 MPa
234 bar, 23.4 MPa
110 bar, 11.0 MPa
386 bar, 38.6 MPa
310 bar, 31.0 MPa
255 bar, 25.5 MPa
193 bar, 19.3 MPa
131 bar, 13.1 MPa
414 bar, 41.4 MPa
386 bar, 38.6 MPa
310 bar, 31.0 MPa
255 bar, 25.5 MPa
193 bar, 19.3 MPa
1.4 liters
43