Instruction; Operation Buttons - VERITAS Florence Manual

Instruction

Operation buttons

5
4
3
2
1
6 7
8
1. Start/stop button
Long press the start/stop button to start
machine running. Press the start/stop button
again to stop machine. The machine rotates
slowly at the beginning of the sewing.
The sewing speed can be controlled by the
speed adjustment slider.
This way you may operate the machine
without foot control.
2. Reverse button
When the A group patterns 01-06 are
selected, the machine will sew reverse at a
low speed if the reverse button is pressed.
The machine will sew forward after the button
is released.
When the A group patterns 07-19, 28-55
adn B group patterns 01-65 are selected,
the machine will immediately sew 3 locking
stitches when the reverse button is pressed,
then automatically stop.
68
9