HAMPTON BAY HB-7902-02 Use And Care Manual page 5

Installation (continued)
Testing the doorbell extender
3
and doorbell range
Test the range by temporarily positioning
the doorbell extender (B) next to the existing
doorbell.
Press the "TEST" button inside the doorbell
extender (B).
Verify the red LED on the doorbell extender (B)
flashes momentarily and the doorbell (A)
sounds.
If the doorbell does not sound, move the
doorbell closer to the doorbell extender and test
again.
Testing the doorbell extender
4
function
To test the function, keep the doorbell
extender (B) next to the existing doorbell and
activate the existing doorbell. If the doorbell (A)
sounds, the system is working correctly.
Making adjustments to the
5
doorbell extender
If the doorbell does not sound, try one or more
of the following steps:
Turn the microphone sensitivity knob (1)
inside the doorbell extender (B) clockwise
to increase microphone sensitivity.
Move the doorbell extender (B) to different
positions around the existing doorbell.
Remove the microphone (2) from the
doorbell extender (B) by gently prying
the microphone (2) out of the doorbell
extender (B) and routing the wires
through the small slot (3) in the doorbell
extender (B). Attach the microphone (2) to
the existing doorbell using double-sided
tape (CC).
NOTE: Do not mount the microphone (2) to doorbell bars
and make sure the small hole in the microphone (2) is not
covered with double-sided tape (DD).
NOTE: Do not permanently mount the doorbell extender
until the doorbell and doorbell extender are working
properly.
B
B
Once the doorbell (A) and doorbell extender (B)
are working correctly, reduce the microphone
sensitivity (1) to the least sensitive position
that allows for reliable activation to minimize
false activation from other household noises.
1
5
Please contact 1-844-760-3644 for further assistance.
B
B
2
3
HAMPTONBAY.com
A
A
B