Enovate Medical MOBIUS POWER Quick Start Manual page 10

ENOVATE MEDICAL CART: QUICKSTART ESSENTIALS
SWAPPING/CHARGING MOBIUS BATTERIES
Step 1: Insert your fully charged Battery Pack into
the Battery Holster located on the lower
arm above the base of the workstation.
Step 2: The Battery Pack 'Time Remaining' is
indicated on the LCD Message Center.
Step 3: Once the LCD Message Center is active, your
computer and other electronic devices on
your mobile cart may now be powered on.
MOBIUS POWER Holster Charger
Use of the Holster Charger requires two connections. One end
connects to the Battery Holster on your mobile cart and the other
to an AC electrical outlet. After you connect the Holster Charger
to both the Battery Holster and the electrical outlet, the LCD will
read 'AC Powered'. Charge status can be checked by unplugging
the Holster Charger from the wall outlet and reading the
'Time Remaining' on the LCD, or use the LEDs on the Battery Pack. Please
refer to next page for the explanation of how to read the LEDs on each
individual MOBIUS POWER Battery Pack.
07. 26. 17
www.enovatemedical.com