Maintenance And Care - Zanussi SD 2811 W Instruction Booklet

Maintenance and Care

• Always switch off the power supply pull out the
plug before cleaning the appliance!
• After use, wipe the spindrum dry with a cloth.
• If dirty washing has been spun, it is necessary
to rinse the drum out with clear water in order to
avoid soiling the next load of washing.
• Clean the exterior of the spin dryer with a damp
cloth and wipe it dry.
• Use a solution of water and mild washing up
liquid only to clean the appliance.
• Do not use abrasive cleaning agents.
• Never use petrol or other solvent liquids.
• The spin dryer requires no other maintenance.
6
If unexpected difficulties arise
• Before contacting your local Service Force
Centre, check whether the fault is due to one of
the following minor causes.
The motor does not function:
• Has the fuse blown?
• Is there damage to the mains cable, plug or
socket? Turn off the power supply. Pull out the
plug before checking!
• Never open the motor yourself!
Water does not flow out:
• Switch off the power supply. Pull out the plug!
Check whether the outlet spout is blocked by a
piece of washing.
• Press the spin drum from the inside against the
outer casing with your hand and remove the
piece of washing.
The spin dryer does not pick up spin
speed:
• Please note that the spin dryer normally
overcomes a certain amount of unbalance itself
when picking up spin speed. The motor and spin
drum are suspended flexibly for that reason.
• However, if the unbalance is too great (brought
about by incorrect loading of the spin dryer),
the machine cannot pick up spin speed.
The spin dryer "jumps":
1. Switch off the spin dryer immediately!
2. When the drum has come to a standstill, repack
the washing evenly.
3. Reload the spin dryer in accordance with the
Model
Filling amount (Kg)
Spin speed
(r.p.m.)
Height (cm)
SD
2811W
3,0
2800
56