Bosch AdvancedCut 18 Original Instructions Manual page 13

The chain of the saw blade can tear if subjected to ex-
u
cessive strain. You should replace the power tool and/
or saw blade if this happens.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for domestic use only. It is inten-
ded for cutting branches, slats, hardwood and softwood. It is
suitable for straight cuts.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Saw blade
(2) Base plate
(3) Lock-off button for On/Off switch
(4) On/Off switch
(5) Battery release button
(6) Battery
(7) Battery charge indicator
(8) Cover of the saw blade receptacle
(9) Locking lever of the saw blade receptacle cover
(10) Riving knife
(11) Handle (insulated gripping surface)
(12) Suspension strap
(13) Saw blade receptacle
Technical Data
All-purpose saw
Article number
Rated voltage
A)
No-load speed n
0
Max. cutting depth
Weight according to
EPTA‑Procedure 01:2014
Recommended ambient
temperature during char-
ging
Permitted ambient temper-
B)
ature during operation and
during storage
Bosch Power Tools
AdvancedCut 18
3 603 CD5 1..
V= 18
−1
min 0−7000
mm 65
A)
kg 1.1–1.4
°C 0 to +35
°C –20 to +50
All-purpose saw
Recommended re-
chargeable batteries
C)
Recommended chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Technical data determined using the battery that comes with the
product.
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑11.
Typically, the A-weighted sound pressure level of the power
tool is 75 dB(A). Uncertainty K = 5 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841‑2‑11:
Cutting boards with saw blade NanoBlade Wood Speed 65:
2 2
a = 2.5 m/s , K = 1.5 m/s .
h,B
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Battery Charging (see figure B)
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
English | 13
AdvancedCut 18
PBA 18V...W-.
AL 18...
1 609 92A 65Y | (06.11.2020)