Introduction; Buttons And Windows In The Fuu - Shure Microflex Complete User Manual

1 Introduction

This manual describes the procedure for updating/downgrading the firmware in the various units in the MXC/DCS 6000 system.
The manual does also describe how to upload a MXC/DCS 6000 Feature License into the CCU Central Units.
For upload of language files and start-up bitmap in DC 6990 Conference Units please refer to the manual 'User Manual DC 6990
Languages'.

2 Buttons and windows in the FUU

Update System
Press this buttons to update the
firmware in all units in the system
Status window
This window shows the status and
give messages to the user
CCU window
The windows shows 'Type', 'Serial
number' & 'Firmware version' of the
CCU.
'Present Units' window
All units present in the system are
shown in this window
'Selected Units' window
Unit, which are selected for
upgrading are shown in this window
Select unit buttons
Select one or more units in the
'Present Units' window and press
the 'Select Units(s) button' to add
'Selected Units' window or select by
type
'Remove buttons'
Press those buttons to either
remove a selected unit or to remove
all units from the 'Selected Units'
window
Update status button
Press this buttons to update the
status of the units connected
'Update Units button'
Press this button to update the
units present in the 'Selected
Units window'
'Command line' button
Press this Icon to get a window
for sending commands to the
CCU
'Set Feature Id button'
Press this button change the
Feature setting for the selected
units
Shure Incorporated
3