Solder Sponge - Parkside PLS 48 D2 Instructions For Use Manual

Level 4: Approx . 400 °C high soldering temperature, e .g . for
removing solder from small solder joints .
Level 5: Approx . 500 °C high soldering temperature, e .g . for
removing solder from larger solder joints .
Switching off
NOTE
Always place the soldering iron
f
u
.
Press the ON / OFF switch
„
use, remove the plug from the mains socket

Solder sponge

CAUTION
The hot soldering tip
f
dry solder sponge
damaged
NOTE
The soldering sponge serves to clean the soldering tip .
f
Moisten the soldering sponge before using it .
f
PLS 48 D2
n
after use ack in the coil spring
r
to the position "0" . When not in
t
must never come into contact with a
. Otherwise, the solder sponge may be
s
GB | IE |
27