Laser Pointer Extension Kit (Optional) - Baur PD-SGS User Manual

P arabolic reflec tor (optional)
12.5

Laser pointer extension kit (optional)

Assembly on the parabolic reflector and commissioning
1. Put the laser pointer in the laser pointer carrier, so that the On/Off button is horizontally
in line with the rotary know on the side of the laser pointer carrier.
2. Replace the red dot sight with the laser pointer carrier.
3. Tighten the locking screw on the side of the carrier.
4. Switch-on the laser pointer by turning the rotary knob.
36 / 46
Further information:
user manual of the laser pointer

user manual of the laser pointer carrier

P D-S G S
822-162-1