Operational Control; Control Buttons; On/Off Button - Baur PD-SGS User Manual

Operational c ontrol
7 O
PERATIONAL CONTROL
7.1

Control buttons

The PD-SGS is controlled by three buttons on the device as shown below:
7.2

On/Off button

The On/Off button is used to turn the PD-SGS on and off.
Note that the On/Off button should be pressed and held down for two seconds before the
power is switched.
18 / 46
1 MODE button
2 On/Off button
3 TRIGGER button
P D-S G S
822-162-1