P D-S G S
4
PD-SGS
4.1
PD-SGS outline
The PD-SGS has a tough ABS enclosure with rubber protective covering around the PD
sensors. Both built-in PD sensors are mounted at the front of the device so that they can be
easily directed at the inspection point. The PD-SGS is controlled with two membrane
switches on the front panel and a trigger button underneath. An OLED type screen is used
for function control and providing both text and graphical output information to the user. In
addition the PD-SGS has an audio output through both a built-in speaker and pluggable
headphones.
The unit is powered by a lithium-ion rechargeable battery giving a life of over 12 hours of
use. The software has intelligent power management prolonging battery life.
4.2
PD-SGS Input/Output
The PD-SGS has an input and output as detailed in the tables below:
Front panel
Display
Control button MODE
On/Off button
Side panels
Headphone socket
External AE sensor
Handle
Trigger button
Power charge socket
822-162-1
OVERVIEW
Type
OLED display
6 x PD level LEDs
Membrane switch
Membrane switch
Type
3.5 mm jack
3.5 mm jack
Type
Push button
2.1 mm DC power
P D-S G S overview
15 / 46