Using The Parabolic Reflector - Baur PD-SGS User Manual

P arabolic reflec tor (optional)
4. Turn on the red dot sight and choose one of the predefined light intensities for your
specific lighting conditions.
Switch positions:



Note: Turn off the red dot sight after use to extend the battery life.
12.2

Using the parabolic reflector

With the parabolic reflector connected to the PD-SGS, the reflector should be pointed at the
HV equipment being inspected.
Look through the view finder with both eyes open and line up the red dot visible through the
view finder with the centre of the inspection area.
The PD-SGS device should be operated in AE mode and it will register a dB reading on the
user display. It will also generate an audible output according to the level of activity detected.
34 / 46
A (AUTO) – brightness adjusts to surroundings
Off – turns off the red dot sight
M (MANUAL) – one brightness mode; not adjustable
Further information: user manual of the parabolic reflector
P D-S G S
822-162-1