P D-S G S
7.5.3
Setting the volume
The volume of the sound for the built-in speaker and the headphones can be adjusted. To
change the volume, hold down the MODE button for about 2 seconds and the speaker icon
will appear on the screen.
By pressing and holding the TRIGGER button, the desired volume can be selected as the
volume cycles through the different ranges.
Release the TRIGGER button when the required volume is highlighted.
Once the correct volume is selected, pressing the MODE button again will return the unit to
the AE/TEV display.
If no adjustments are made for 5 seconds, the unit will automatically return to the AE/TEV
display.
822-162-1
Operational c ontrol
23 / 46