Maintenance; Warranty - Husqvarna 586 63 67-01 Operating Instructions Manual

Spike Aerator
Practical Tips
Aerate in the straightest line possible.
Make overlapping passes to increase
density of the spike point pattern.
If the ground is extremely hard and dry, it
should be sprinkled or watered down for
one to two hours prior to use of the
aerator.
Do not aerate if the ground is too wet
(muddy).
Adding Extra Weight
Figure 2
To increase depth of spike point
penetration, weight can be added to the
tray:
Weights (concrete patio blocks are
recommended) should be secured with
rubber tie down straps.
Transporting Aerator
1
Figure
Push the Lift Handle (3) in the opposite
direction of the arrow until it ratchets
into the notch (transport position =
wheels down).

Maintenance

Before Each Use
Check all nuts and bolts for tightness,
when necessary retighten.
As Needed
If rust appears, sand lightly and coat
a ted parts with enamel paint.
Lubricate wheel bearings.
Storage
When storing for longer periods of time
(e.g. in winter):
Coat exposed, unpainted metal parts
with light oil.
Store the equipment in a dry area.
7
Technical Data
Length in cm
Width in cm
Height in cm
Weight in kg
Operating Width in cm

Warranty

In each country, warranty conditions
issued by our company or importer are
valid.
Defective equipment will be
free of charge during the warranty period
where these are the results of material
s or manufacturing. In case of
warranty claims, please contact your
dealer or nearest branch e.
English
106
104
105
24
100
ed by us
GB