Adjusting Position - Zanussi ZHC 916X Instruction Booklet

Adjusting Position (10)

There are 2 adjustable hooks at the rear of the hood,
which can be used to adjust its position as follows:
- Turn screws L until the position of screws N
coincides with the lower access holes.
- Turn the screws N to adjust the vertical and
horizontal position of the hood.
- Lock the screws L to fasten the hood against the
wall.
WARNING! DO NOT REMOVE THE SUPPORT ROD
Installation of the Chimney fixing bracket
Determine the height that the motor will be fitted and
also the air outlet direction.
When these positions have been decided fix bracket S
(11) to the wall referring to relevant illustration (12)
regarding the direction of the air outlet and where to fix
the bracket (2).
Ensure that the bracket is fixed exactly as shown in
FIG. 11
INSTALLATION INSTRUCTIONS
14
10
Not supplied
Not supplied
11
12