Table of Contents
Advertisement
AT+ERR
Read Command
AT+ERR?<CR>
Example
AT+ERR?
0b00
Remarks
This Read command is to get the error code for the initialization procedure.
[dddd] is the last 4 digits of the error code, which is a hexadecimal number starting with "0x".
Refer to the Error Code table for detailed information.
See Also
AT+KVER, AT+VER
Back to the Supported AT Commands.
Appendix II
Response
<CR><LF>[dddd]<CR><LF>
AT Commands
55
Advertisement
Table of Contents
