AT+APN
Read Command
AT+APN?<CR>
Example
AT+APN?
internet
Write Command
AT+APN=[AP_Name]<CR>
Example
AT+APN=emome
OK
Remarks
The Read command is to get the Access Point Name (APN) currently in use.
The Write command is to set the Access Point Name (APN) you want to connect to.
[AP_Name] is a string for the name of a GPRS access point, maximum 128 characters.
See Also
ATDT, AT+CHAP, AT+DHCP, AT+DLMT (GPRS)
Back to the Supported AT Commands.
Appendix II
Response
<CR><LF>[AP_Name]<CR><LF>
GPRS Access Point "internet" is in use.
Response
<CR><LF>OK<CR><LF>
Change to Access Point "emome".
AT Commands
47