Table of Contents
Advertisement
8400 GPRS Cradle
Reference Manual
You can check all these settings via 1. Settings > 1. Information.
Go through the following steps on each cradle.
6) Screw the antenna to the cradle.
7) Connect the power supply cord to a suitable power outlet.
Note: After powering on, the POWER indicator will start to flash in a few seconds,
indicating the cradle is in initialization process. Then, it keeps flashing, indicating
initialization failed due to lack of SIM card. Ignore it.
8) Seat the mobile computer in the cradle.
Go to 1. Settings > 4. Default Set to reset the cradle.
9) Disconnect the power supply cord.
10) Insert SIM card to the cradle.
11) Re-connect the power supply cord.
16
Advertisement
Table of Contents
